Ideal for cutting (stainless) steel tubes and sticky materials

Fusion NX saw blades have specifically been designed for stainless steel applications and sticky materials, but they are also suitable for cutting (thin walled) steel tubes and stainless steel flying cut-off applications.

Advantages:

• Ideal for (thin walled) stainless steel tubes and sticky materials
• Dedicated thin PVD coating
• Reduced side pick-up
• Very low friction coefficient
• Wear resistant
• Very high hardness
• Very high temperature resistance
• Suitable for extremely high cutting speeds and feeds
• To be used with spray mist or emulsion coolant for maximal results
• For relevant applications, a recoating program is available

Applications:

• Ideal for cutting (stainless) steel tubes and sticky materials
• Suggested cutting speed:
  Steel 60 – 120 m/min
  Austenitic stainless steel (300 series) 30 – 50 m/min
  Ferritic w/o Ti (409 & 412) 220 – 260 m/min
  Ferritic with Ti (441) 60 – 120 m/min
• Machines: Automatic, semi-automatic and flying cut off applications

Low friction for high speed cutting of harder materials

Due to a special, wear resistant, multilayer PVD coating with a low friction coefficient, very high hardness and very high temperature resistance, Fusion 2.0 saw blades can be used for cutting medium to high tensile carbon steel on extremely demanding applications.

Also very suitable for flying cut-off applications.

Advantages:

• High blade life
• Increased uptime
• Reduced side pick-up
• Low friction coefficient
• Wear resistant
• Very high temperature resistance
• Suitable for extremely high cutting speeds and feeds
• To be used with spray mist or emulsion coolant for maximal results
• For relevant applications, a recoating program is available

Applications:

• Medium to high tensile carbon tubes
• Suggested cutting speed: 120 – 200 m/min
• Feed: 0.04 – 0.18 mm/tooth
• Machines: Automatic, semi-automatic and flying cut off applications

Ideal for cutting thin walled (stainless) tubes and profiles, sticky materials

The Power NX saw blade has specifically been designed for cutting (very) thin walled (stainless) steel tubes and profiles.

A special, temperature resistant, thin PVD coating, combined with a thinned cutting area, enables these blades to be used for extremely demanding applications, like fast cutting of thin walled products.

Advantages:

• Especially designed for cutting stainless steel
• Thin PVD coating with a very low friction coefficient and high hardness
• Very suitable for extremely demanding applications
• Low vibration
• Less burr
• Reduced risk of tube-end deformation
• Very high temperature resistance
• To be used with spray mist or emulsion coolant for maximal results
• For relevant applications, a recoating program is available

Applications:

• Cutting thin walled (stainless) tubes and profiles, sticky materials
• Suggested cutting speed:
  Austenitic stainless steel (300 series) 30 – 50 m/min
  Ferritic w/o Ti (409 & 412) 220 – 260 m/min
  Ferritic with Ti (441) 60 – 120 m/min
• Machines: Automatic, semi-automatic, flying cut off applications

Thin kerf and low friction multilayer PVD coating for cutting thin walled tubes & profiles

Power 2.0 saw blades provide an optimal combination of a rigid saw blade and a vibration-reducing thin kerf for cutting thin walled tubes and profiles on very demanding applications.

A superior surface finish and low friction multilayer PVD coating ensure low vibration, less burr and reduced risk of tube-end deformation.

Advantages:

• Ideal for very thin walled tubes and profiles
• Low friction, high hardness and high temperature resistant multilayer PVD coating
• Very suitable for extremely demanding applications
• Reduced cutting resistance
• Low vibration
• Less burr
• Reduced risk of tube-end deformation
• Wear resistant
• To be used with spray mist or emulsion coolant for maximal results
• For relevant applications, a recoating program is available

Applications:

• Cutting thin walled steel tubes and profiles
• Suggested cutting speed: 120 – 200 m/min.
• Feed: 0.04 – 0.18 mm/tooth.
• Machines: Automatic, semi-automatic and flying cut off applications