Cutting austenitic stainless steel Ø > 35 mm

 

The CX6 L saw blade has specifically been designed for cutting austenitic stainless steel bars with a diameter larger than 35mm at very high production rates.

With its dedicated geometry, very fast cutting and good surface finish can be achieved.

Advantages:

  • New saw body design
  • Specifically developed for stainless steel solids with a diameter > 35 mm
  • Dedicated tooth geometry
  • Very high production rates

Applications:

  • Austenitic stainless steel bars with a diameter > 35 mm
  • Suggested cutting speed: 80 – 120 m/min.
  • Feed: 0,06 – 0,12 mm/tooth.
  • Soco, Tsune, Amada, Mega, Kasto, Kentai, Behringer, Exactcut, Everising

Note: Respect 10% fill ratio, use wire brush, check quality and supply of oil. Mist preferred. Check temperature of cut surface (should be cold).