The top performer on hard steel tubes
Champion TH is part of a new generation of saw blades – for extremely high output and very long blade life.
This product has been developed to cut thin walled tubes with tensile strengths up to 1,800 N/mm2.
The Champion TH saw blade can cope with the following 3 extreme cutting conditions:
- Cutting tubes with tensile strengths up to 1,800 N/mm2
- Cutting speeds up to 350 m/min
- Very high feed rates
- High performance cutting of thin and medium wall drawn tubes and high tensile tubes on high-end cut-off machines
- Cutting speed: 280 – 220 m/min.
- Tooth load 1/2/3: relation 1/3/0.8. Values: 0.05/0.15/0.04 mm/tooth.
- Machines: Rattunde, Sinico, Bewo, RSA, Adige
Note: Respect 10% fill ratio, use wire brush and high quality oil.
|TYPICAL APPLICATION EXAMPLES CHAMPION TH
|Seamless tube||25 x 3,25||750||275||0,04 – 0,095||15|
|Welded tube||42 x 3,0||700||260||0,06 – 0,2||10|
|Seamless tube||44 x 3,0||1,400||240||0,06 – 0,18||12|