Cutting high tensile carbon steel (> 900 N/mm2) and Ø > 35 mm stainless steel

 

Applying a new saw body design, new tooth geometries and a new type of PVD coating, the CX1H saw blade has specifically been designed for cutting high tensile carbon steel (> 900 N/mm2), carbon content ≥ 0.60%) at very high production rates.

It is also very suitable for cutting ferritic, martensitic and duplex stainless steel bars with a diameter larger than 35 mm.

Advantages:

  • New saw body design
  • New dedicated tooth geometries
  • New type of coating
  • Best blade life performances when cutting high tensile carbon steel
  • High productivity when cutting stainless steel

Applications:

  • Hard solid carbon steel with a tensile strength higher than 900 N/mm2 and ferritic, martensitic and duplex stainless steel bars Ø >35 mm on high performance machines
  • Suggested cutting speed: 60 – 140 m/min.
  • Feed: 0,05 – 0,09 mm/tooth.
  • All known brands of stationary automatic sawing machines such as: Soco,  Nishijimax, Tsune, Mega, Everising, Rattunde, Behringer etc.

Note: Respect 10% fill ratio, use wire brush, check quality and supply of oil. Mist preferred. Check temperature of cut surface (should be cold).